D-Link DXS-3600 Series Reference Manual page 52

DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch Web UI Reference Guide
Parameter
SNMP Version
SNMP V3 Encryption
Auth-Protocol by Password
Password
Priv-Protocol by Password
Password
Auth-Protocol by Key
Key
Priv-Protocol by Key
Key
IP Address-List Name
Click the Add button to add a new entry based on the information entered.
Click the Delete button to remove the specified entry.
Description
Select the SNMP version. Options to choose from are v1, v2c, and v3.
When selecting v3 in the SNMP Version drop-down list, this option is
available. Options to choose from are None, Password, and Key.
When selecting v3 in the SNMP Version drop-down list, and selecting
Password in the SNMP V3 Encryption drop-down list, this option is
available. Select the authentication level. Options to choose from are
the following:
•
MD5 - Select to use the HMAC-MD5-96 authentication level. This
field will require the user to enter a password or a key.
•
SHA - Specify that the HMAC-SHA authentication protocol will
be used. This field will require the user to enter a password or a
key.
Enter the authentication protocol password here. For MD5 this
password must be between 8 and 16 characters long. For SHA this
password must be between 8 and 20 characters long.
When selecting v3 in the SNMP Version drop-down list, and selecting
Password in the SNMP V3 Encryption drop-down list, this option is
available. Select the private protocol. Options to choose from are the
following:
•
None - Specify that no authorization protocol is in use.
•
DES56 - Specify that DES 56-bit encryption is in use, based on
the CBC-DES (DES-56) standard. This field will require the user
to enter a password or a key.
Enter the private protocol password here. For none, this field will be
disabled. For DES56 this password must be between 8 and 16
characters long.
When selecting v3 in the SNMP Version drop-down list, and selecting
Key in the SNMP V3 Encryption drop-down list, this option is available.
Select the authentication level. Options to choose from are the
following:
•
MD5 - Select to use the HMAC-MD5-96 authentication level. This
field will require the user to enter a password or a key.
•
SHA - Specify that the HMAC-SHA authentication protocol will
be used. This field will require the user to enter a password or a
key.
Enter the authentication protocol key here. For MD5 this key must be
32 characters long. For SHA this key must be 40 characters long.
When selecting v3 in the SNMP Version drop-down list, and selecting
Key in the SNMP V3 Encryption drop-down list, this option is available.
Select the private protocol. Options to choose from are the following:
•
None - Specify that no authorization protocol is in use.
•
DES56 - Specify that DES 56-bit encryption is in use, based on
the CBC-DES (DES-56) standard. This field will require the user
to enter a password or a key.
Enter the private protocol key here. For none, this field will be
disabled. For DES56 this key must be 32 characters long.
Enter the standard IP access control list (ACL) to associate with the
user.
41