Policy Route - D-Link DXS-3600 Series Reference Manual

DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch Web UI Reference Guide
Parameter
Weight
AS Path
Metric Type
Click the Apply button to accept the changes made.
Click the Back button to return to the previous window.

Policy Route

This window is used to view and configure the policy route settings.
To view the following window, click L3 Features > Policy Route, as shown below:
Click the Edit button to modify the specified entry.
Enter a page number and click the Go button to navigate to a specific page when multiple pages exist.
After clicking the Edit button, the following page will appear.
Description
where we can enter value here. They are listed below in order from top
to bottom:
•
Half-Life: Enter the half-life time value here after which the
penalty of the reachable routes is decreased by half. The range
is from 1 to 45 minutes.
•
Re-Use: Enter the re-use value here. This specifies that if the
penalty of a route is lower than this value, the route is
unsuppressed. The range is 1 to 20000.
•
Suppress: Enter the suppress value here. This specifies that if
the penalty of a route is higher than this value, the route is
suppressed. The range is from 1 to 20000.
•
Maximum Suppress Time: Enter the maximum suppress time
value here that a route can be suppressed. The range is from 1
to 255 minutes.
•
Unreachability Half-Life: Enter the unreachability half-life time
value here after which the penalty of the unreachable routes is
decreased by half. The range is from 1 to 45 minutes.
Select and enter the weight value here that will be used in the
modification. The range is from 0 to 65535.
Select and enter the AS path value here that will be used in the
modification.
Select the metric type here that will be used in the modification.
Options to choose from are Type-1 and Type-2.
•
Type-1: Specifies to use the OSPF external type-1 metric.
•
Type-2: Specifies to use the OSPF external type-2 metric.
Figure 6-190 Policy Route Window
314