D-Link DXS-3600 Series Reference Manual page 165

DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch Web UI Reference Guide
Click the Apply button to accept the changes made.
Click the Delete button to delete an entry based on the information entered.
Click the Add button to add a new entry based on the information entered.
The fields that can be configured in Member Port Settings are described below:
Parameter
VID
Action
Role
Type
Unit
From Port ~ To Port
Click the Apply button to accept the changes made.
The fields that can be configured in Replace Priority Settings are described below:
Parameter
VID
Action
IP Type
Priority
Click the Apply button to accept the changes made.
The fields that can be configured in Replace Source IP Settings are described below:
Parameter
VID
Description
Enter the multicast VLAN's ID that will be used here. The range is 2 to
4094.
Select Add to add a new entry based in the information entered.
Select Delete to delete an entry based in the information entered.
Select the role here. Options to choose from are Receiver and
Source.
•
Receiver: Specifies to configure the port as a subscriber port
that can only receive multicast data in the multicast VLAN.
•
Source: Specifies to configure the port as an uplink port that can
send multicast data in the multicast VLAN.
Select the type here. Options to choose from are Tagged and
Untagged.
•
Tagged: Specifies that if a port is a tagged member, the packets
sent from the port are tagged with the Multicast VLAN ID.
•
Untagged: Specifies that if the port is an untagged member,
then the packets will be forwarded in the untagged form.
Select the switch's unit ID that will be used here.
Select the switch's port range that will be used here.
Description
Enter the multicast VLAN's ID that will be used here. The range is 2 to
4094.
Select Add to add a new entry based in the information entered.
Select Delete to delete an entry based in the information entered.
Select the IP type here. Options to choose from are IPv4 and IPv6.
•
IPv4: Specifies to the remap priority for IPv4 multicast packets
forwarded on the multicast VLAN.
•
IPv6: Specifies to the remap priority for IPv6 multicast packets
forwarded on the multicast VLAN.
Select the priority value here. The range is from 0 to 7. A lower value
represents a higher priority.
Description
Enter the multicast VLAN's ID that will be used here. The range is 2 to
4094.
154