Configuration Backup To Rcp - D-Link DXS-3600 Series Reference Manual

DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch Web UI Reference Guide
The fields that can be configured are described below:
Parameter
Unit
FTP Server IP
TCP Port
User Name
Password
VRF Name
Source File
Destination File
Click the Backup button to initiate the configuration file backup.

Configuration Backup to RCP

This window is used to initiate a configuration file backup to an RCP server.
To view the following window, click Tools > Configuration Restore & Backup > Configuration Backup
to RCP, as shown below:
Figure 15-16 Configuration Backup to FTP Window
Description
Select the switch unit that will be used for this configuration here.
Enter the FTP server's IP address here. When select the IPv4 option,
enter the IPv4 address of the FTP server in the space provided. When
the IPv6 option is selected, enter the IPv6 address of the FTP server in
the space provided.
Enter the TCP port number used for the FTP connection here. The
range is from 1 to 65535.
Enter the user name used for the FTP connection here. This name can
be up to 32 characters long.
Enter the password used for the FTP connection here. This password
can be up to 15 characters long.
Enter the VRF name here. This name can be up to 12 characters long.
Enter the source filename and path of the configuration file located on
the switch here. This field can be up to 64 characters long. Select the
running-config option to back up the running configuration file from
the switch. Select the startup-config option to back up the start-up
configuration file from the switch.
Enter the destination path and location where the configuration file
should be stored on the FTP server. This field can be up to 64
characters long.
611