D-Link DXS-3600 Series Reference Manual page 237

DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch Web UI Reference Guide
Parameter
Transmit Delay
Retransmit Interval
Click the Apply button to accept the changes made.
The fields that can be configured in OSPF Virtual Link Table are described below:
Parameter
Process ID
Click the Find button to locate a specific entry based on the information entered.
Click the Delete button to delete the specified entry.
Enter a page number and click the Go button to navigate to a specific page when multiple pages exist.
After clicking the Process ID link (1), the following page will appear.
Click the OK button to close the window and return to the previous window.
OSPFv3 LSDB Table
This window is used to find and display the OSPFv3 feature's LSDB information.
To view the following window, click L3 Features > OSPF > OSPFv3 > OSPFv3 LSDB Table, as shown
below:
Description
from 1 to 65535 seconds. Select the Default option to use the default
value, which is 40 seconds.
Enter the transmit delay value here that the router uses to wait before
it transmits a packet. The range is from 1 to 65535 seconds. Select the
Default option to use the default value, which is 1 second.
Enter the retransmit interval value here that the router uses to wait
before it retransmits a packet. The range is from 1 to 65535 seconds.
Select the Default option to use the default value, which is 5 seconds.
Description
Enter the ID for an IPv6 OSPF routing process here. The range is from
1 to 65535.
Figure 6-78 OSPFv3 Virtual Link Settings (Process ID) Window
226