D-Link DXS-3600 Series Reference Manual page 590

DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch Web UI Reference Guide
echo request expired at each successive LSR along the LSP. The LSR returns an MPLS echo reply. If
the sender cannot receive a reply before the timeout, the trace route will stop.
To view the following window, click MPLS > Traceroute MPLS IPv4, as shown below:
The fields that can be configured in Traceroute MPLS IPv4 are described below:
Parameter
IPv4 Address
Mask
Timeout
Click the Start button to initiate the trace.
After clicking the Start button, the following page will appear.
Click the Stop button to terminate the trace prematurely.
Click the Back button to return to the previous window.
Figure 11-21 Traceroute MPLS IPv4 Window
Description
Enter the FEC's IPv4 address here whose LSP connectivity will be
checked.
Select and enter the FEC's subnet mask here.
Enter the trace-route timeout value here. The range is from 1 to 99
seconds. By default, this value is 2 seconds.
Figure 11-22 Traceroute MPLS IPv4 (Start) Window
579