Mld - D-Link DXS-3600 Series Reference Manual

DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch Web UI Reference Guide
The fields that can be configured are described below:
Parameter
ACL Type
ACL List
Click the Find button to display a list of access lists based on the selection made.
Click the View All button to display all configured access lists.
Enter a page number and click the Go button to navigate to a specific page when multiple pages exist.
Click the Apply button to use the selected access list.

MLD

MLD Interface Settings
This window is used to view and configure the Multicast Listener Discovery (MLD) interface settings.
To view the following window, click L3 Features > IP Multicast Routing Protocol > MLD > MLD
Interface Settings, as shown below:
The fields that can be configured in MLD Interface Settings are described below:
Figure 6-86 IGMP SSM Mapping Settings (Select) Window
Description
Select the ACL type that will be used to display the type of existing
access lists in the table here. Options to choose from are IP ACL,
Expert IP ACL, IPv6 ACL, Expert IPv6 ACL, MAC ACL, and Expert
ACL.
Select the radio button of the access list in the table that will be used
here.
Figure 6-87 MLD Interface Settings Window
232