Rip Distribute List - D-Link DXS-3600 Series Reference Manual

DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch Web UI Reference Guide
Parameter
Update Time
Invalid Time
Flush Time
Default Metric
Version
Distance
Click the Apply button to accept the changes made.

RIP Distribute List

This window is used to view and configure the RIP distribution list settings.
To view the following window, click L3 Features > RIP > RIP Distribute List, as shown below:
The fields that can be configured in Distribute List are described below:
Parameter
VRF Name
ACL Name
Interface Name
Description
Enter the update interval in seconds at which the update message is
sent. The range is from 1 to 65535 seconds. Select the Default option
to use the default value here which is 30 seconds.
Enter the invalidate timer value in seconds here. The range is from 1 to
65535 seconds. Select the Default option to use the default value here
which is 180 seconds.
Enter the flush timer value in seconds here. The range is from 1 to
65535 seconds. Select the Default option to use the default value here
which is 120 seconds.
Enter the default metric value here. The range is from 1 to 16. The
default metric is used in redistributing routes from other routing
protocols. The routes being redistributed are learned by other
protocols and have incompatible metric as RIP. The specifying of the
metric allows the metric to be synced. Select the Default option to use
the default metric value, which is 0.
Select the global RIP version that will be used as the default version
for all interfaces here. Options to choose from are v1 (RIPv1) and v2
(RIPv2). Select the Default option to specify that this feature should
use the default configuration. By default, RIPv1 and RIPv2 packets are
received, but only RIPv1 packets are sent.
Enter the administrative distance for RIP here. The range is from 1 to
255. A lower value represents a better route. Select the Default option
to use the default administrative distance for RIP, which is 100.
Figure 6-39 RIP Distribute List Window
Description
Enter the VRF instance's name that will be used here. This name can
be up to 12 characters long.
Enter the access list's name that will be used here. This name can be
up to 32 characters long.
Enter the interface's name that will be used here. This name can be up
to 12 characters long.
198