D-Link DXS-3600 Series Reference Manual page 149

DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch Web UI Reference Guide
Figure 5-57 IGMP Snooping Settings (Modify, Edit) Window
The fields that can be configured in IGMP Snooping VLAN Settings are described below:
Parameter
Minimum Version
Fast Leave
Report Suppression
Suppression Time
Querier State
Query Version
Query Interval
Max Response Time
Robustness Value
Las Member Query Interval
Description
Select the minimum version of IGMP hosts that is allowed on the
VLAN. Options to choose from are 1, 2, and 3.
Select this option to enable or disable the IGMP snooping fast leave
function. If enabled, the membership is immediately removed when the
system receive the IGMP leave message.
Select this option to enable or disable the report suppression. The
report suppression function only works for IGMPv1 and IGMPv2 traffic.
When report suppression is enabled, the Switch suppresses the
duplicate reports sent by hosts. The suppression for the same group
report or leave will continue until the suppression time expired. For
report or leave messages to the same group, only one report or leave
message is forwarded. The remaining report and leave messages are
suppressed.
Enter the interval of suppressing duplicate IGMP reports or leaves.
The range is from 1 to 300.
Select this option to enable or disable the querier state.
Select the general query packet version sent by the IGMP snooping
querier. Options to choose from are 1, 2, and 3.
Enter the interval at which the IGMP snooping querier sends IGMP
general query messages periodically. The range is from 1 to 31744.
Enter the maximum response time, in seconds, advertised in IGMP
snooping queries. The range is from 1 to 25.
Enter the robustness variable used in IGMP snooping. The range is
from 1 to 7.
Enter the interval at which the IGMP snooping querier sends IGMP
group-specific or group-source-specific (channel) query messages.
The range is from 1 to 25.
138