Rmon; Rmon Global Settings; Rmon Statistics Settings - D-Link DXS-3600 Series Reference Manual

Layer 2/3 managed 10gigabut ethernet switch

Hide thumbs Also See for DXS-3600 Series:

Table of Contents

DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch Web UI Reference Guide

Click the Delete button to remove the specified entry.

RMON

This window is used to enable or disable remote monitoring (RMON) for the rising and falling alarm trap

feature for the SNMP function on the Switch.

To view the following window, click Management > RMON > RMON Global Settings, as shown below:

The fields that can be configured in RMON Global Settings are described below:

RMON Rising Alarm Trap

RMON Falling Alarm Trap

Click the Apply button to accept the changes made.

This window is used to configure and display the RMON statistics on the specified port.

To view the following window, click Management > RMON > RMON Statistics Settings, as shown below:

The fields that can be configured in RMON Statistics Settings are described below:

Click the Add button to add a new entry based on the information entered.

Figure 4-13 RMON Global Settings Window

Select this option to enable or disable the RMON Rising Alarm Trap

Select this option to enable or disable the RMON Falling Alarm Trap

Figure 4-14 RMON Statistics Settings Window

Select the switch unit that will be used for this configuration here.

Select to choose the port.

Enter the RMON table index. The value is from 1 to 65535

Enter the owner string. The string can be up to 127 characters.