D-Link DXS-3600 Series Reference Manual page 521

DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch Web UI Reference Guide
The fields that can be configured in BPDU Attack Protection Global Settings are described below:
Parameter
BPDU Attack Protection State
BPDU Attack Protection Trap
State
Click the Apply button to accept the changes made.
The fields that can be configured in BPDU Attack Protection Port Settings are described below:
Parameter
Unit
From Port ~ To Port
State
Mode
Click the Apply button to accept the changes made.
Figure 9-63 BPDU Attack Protection Window
Description
Select to enable or disable the BPDU attack protection feature's global
state here.
Select to enable or disable the BPDU attack protection feature's trap
state here.
Description
Select the switch unit that will be used for this configuration here.
Select the appropriate port range used for the configuration here.
Select to enable or disable the BPDU attack protection feature's state
on the port(s) specified.
Select the BPDU attack protection feature's mode that will be applied
to the port(s) specified. Options to choose from are Drop, Block and
Shutdown.
•
Drop - Drop all received BPDU packets when the port enters
under attack state.
•
Block - Drop all packets (include BPDU and normal packets)
when the port enters under attack state.
•
Shutdown - Shut down the port when the port enters under
attack state.
510