D-Link DXS-3600 Series Reference Manual page 153

DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch Web UI Reference Guide
Parameter
ACL Name
VID
Click the Apply button to accept the changes made.
The fields that can be configured in IGMP Snooping Filter Table are described below:
Parameter
Unit
From Port ~ To Port
Click the Find button to locate a specific entry based on the information entered.
Click the View All button to display all the entries.
IGMP Snooping Mrouter Settings
This window is used to view and configure the specified interface(s) as the multicast router ports or as
forbidden to be multicast router ports on the Switch.
To view the following window, click L2 Features > L2 Multicast Control > IGMP Snooping > IGMP
Snooping Mrouter Settings, as shown below:
The fields that can be configured in IGMP Snooping Mrouter Settings are described below:
Parameter
VID
Configuration
Unit
From Port ~ To Port
Description
Enter the standard IP access list's name here. This is used to permit
users to join a group (*, G), specify "any" in source address field and G
in destination address field of the access list entry. This name can be
up to 32 characters long.
Enter the VLAN's ID used for this configuration here. The range is from
1 to 4094.
Description
Select the switch's unit ID that will be used here.
Select the switch's port range that will be used here.
Figure 5-60 IGMP Snooping Mrouter Settings Window
Description
Enter the VLAN ID used here. The range is from 1 to 4094.
Select the port configuration. Options to choose from are Port, and
Forbidden Port.
•
Port - Select to have the configured ports to be static multicast
router ports.
•
Forbidden Port - Select to have the configured ports not to be
multicast router ports.
Select the switch unit that will be used for this configuration here.
Select the appropriate port range used for the configuration here.
142