D-Link DXS-3600 Series Reference Manual page 71

DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch Web UI Reference Guide
assigned to clients. Use this window to exclude a single IPv6 address or a range of IPv6 addresses. The
excluded addresses are only applied to the pool(s) for address assignment.
To view the following window, click Management > DHCP > DHCPv6 Server > DHCPv6 Server
Exclude Address, as shown below:
The fields that can be configured in DHCPv6 Server Exclude Address are described below:
Parameter
Low IPv6 Address
High IPv6 Address
Click the Apply button to accept the changes made.
Click the Delete button to remove the specified entry.
DHCPv6 Server Binding
This window is used to view and clear the DHCPv6 server's binding entries.
To view the following window, click Management > DHCP > DHCPv6 Server > DHCPv6 Server Binding,
as shown below:
The fields that can be configured in DHCPv6 Server Binding are described below:
Parameter
IPv6 Address
Click the Find button to locate a specific entry based on the information entered.
Click the Clear button to clear the entries based on the information specified.
DHCPv6 Server Interface Settings
This window is used to view and configure the DHCPv6 server's interface settings.
Figure 4-39 DHCPv6 Server Exclude Address Window
Description
Enter the excluded IPv6 address or first IPv6 address in an excluded
address range here.
Optionally, enter the last IPv6 address in the excluded address range.
Figure 4-40 DHCPv6 Server Binding Window
Description
Enter the binding entry's IPv6 address to be displayed or cleared here.
Select the All option to display or clear all DHCPv6 client prefix
bindings in or from the binding table.
60