Ddm Settings; Ddm Temperature Threshold Settings - D-Link DXS-3600 Series Reference Manual

DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch Web UI Reference Guide
voltage threshold settings, bias current threshold settings, Tx power threshold settings, and Rx power
threshold settings.

DDM Settings

The window is used to view and configure the action that will occur for specific ports when an exceeding
alarm threshold or warning threshold event is encountered.
To view the following window, click OAM > DDM > DDM Settings, as shown below:
The fields that can be configured in DDM Shutdown Settings are described below:
Parameter
Unit
From Port ~ To Port
State
Shutdown
Click the Apply button to accept the changes made.

DDM Temperature Threshold Settings

This window is used to view and configure the DDM Temperature Threshold Settings for specific ports on
the Switch.
To view the following window, click OAM > DDM > DDM Temperature Threshold Settings, as shown
below:
Figure 10-25 DDM Settings Window
Description
Select the switch unit that will be used for this configuration here.
Select the appropriate port range used for the configuration here.
Use the drop-down menu to enable or disable the DDM state.
Specify whether to shut down the port, when the operating parameter
exceeds the Alarm or Warning threshold.
•
Alarm - Shutdown the port when the configured alarm threshold
range is exceeded.
•
Warning - Shutdown the port when the configured warning
threshold range is exceeded.
•
None - The port will never shutdown regardless if the threshold
ranges are exceeded or not. This is the default.
559