Stp; Stp Global Settings - D-Link DXS-3600 Series Reference Manual

DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch Web UI Reference Guide
Parameter
Action
New Outer VID
802.1P Priority
New Inner VID
Click the <<Back button to return to the previous window.
Click the Apply button to accept the changes made.

STP

STP Global Settings

This window is used to view and configure the STP global settings.
To view the following window, click L2 Features > STP > STP Global Settings, as shown below:
The field that can be configured for STP State is described below:
Parameter
STP State
Click the Apply button to accept the changes made.
Description
Select the action that will be taken here. Options to choose from are
Dot1q-Tunnel and Translate.
•
Dot1q-Tunnel: Specifies that the outer-VID will be added for
matched packets.
•
Translate: Specifies that the outer-VID will replace the outer-VID
of the matched packets.
Enter the new outer VLAN's ID here. The range is from 1 to 4094.
Select the 802.1p priority value here. The range is from 0 to 7. A lower
value has a higher priority.
After selecting Dot1q-Tunnel as the action, enter the new inner VLAN's
ID here. The range is from 1 to 4094. This option is only available
when Dot1q-Tunnel was selected as the action.
Figure 5-38 STP Global Settings Window
Description
Select to enable or disable the STP global state here.
120