D-Link DXS-3600 Series Reference Manual page 66

DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch Web UI Reference Guide
DHCP Server Manual Binding
This window is used to view and configure the DHCP server feature's manual binding settings. With a
manual binding entry, the IP address can be either be bound with a client-identifier or bound with the
hardware address of the host.
To view the following window, click Management > DHCP > DHCP Server > DHCP Server Manual
Binding, as shown below:
The fields that can be configured in DHCP Server Manual Binding are described below:
Parameter
Pool Name
Host
Mask
Hardware Address
Client Identifier
Click the Apply button to accept the changes made.
Click the Delete button to remove the specified entry.
DHCP Server Dynamic Binding
This window is used to view and clear the DHCP server's dynamic binding entries.
To view the following window, click Management > DHCP > DHCP Server > DHCP Server Dynamic
Binding, as shown below:
The fields that can be configured in DHCP Server Dynamic Binding are described below:
Figure 4-32 DHCP Server Manual Binding Window
Description
Enter the DHCP server's pool name here. This name can be up to 32
characters long.
Enter the DHCP host's IPv4 address here.
Enter the DHCP host's network subnet mask here.
Enter the DHCP host's MAC address here.
Enter the DHCP host's identifier in hexadecimal notation here. The
client identifier is formatted by the media type and the MAC address.
Figure 4-33 DHCP Server Dynamic Binding Window
55