D-Link DXS-3600 Series Reference Manual page 278

DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch Web UI Reference Guide
Click the Apply button to accept the changes made.
The fields that can be configured in IP Multicast Table Lookup Mode are described below:
Parameter
Table Lookup Mode
Click the Apply button to accept the changes made.
The fields that can be configured in IP Multicast Boundary are described below:
Parameter
VID
ACL Name
Filter Mode
Action
Click the Apply button to accept the changes made.
The fields that can be configured in IP Multicast Interface Table are described below:
Parameter
Interface Name
Click the Find button to locate a specific entry based on the information entered.
Click the View All button to display all the entries.
Enter a page number and click the Go button to navigate to a specific page when multiple pages exist.
After clicking the Please Select button, the following page will appear.
Description
Select the IP multicast table lookup mode here. Options to choose
from are IP and MAC.
•
IP: Specifies the multicast forwarding lookup based on the IP
address.
•
MAC: Specifies the multicast forwarding lookup based on the
MAC address.
Description
Enter the VLAN ID that will be used here. The range is from 1 to 4094.
Click the Please Select button to select a pre-configured access list
which includes a list of permit or denied (*,G) or (S,G) entries. To
permit users to join a channel (S,G), specify S in source address field
and G in destination address field of the access list entry. To permit
users to join a group (*,G), specify "any" in source address field and G
in destination address field of the access list entry.
Select the filter mode here. Options to choose from are Both, Out, and
In.
•
Both: Specifies to use both the Out and In filtering methods.
•
Out: Specifies to filter the PIM join message or IGMP join
message arrive at the interface. This filtering prevent the
interface from becoming an outgoing interface for the denied
(*,G) or (S,G) entries.
•
In: Specifies to filter the multicast user traffic arriving at the
interface based on the specified access list. This filters the
multicast traffic for specific group traffic, or for specific groups
from specific source.
Select Add to add a new entry based in the information entered.
Select Delete to delete an entry based in the information entered.
Description
Enter the interface's name that will be used for the search here.
267