Configuration Backup To Tftp; Configuration Backup To Ftp - D-Link DXS-3600 Series Reference Manual
Layer 2/3 managed 10gigabut ethernet switch
Hide thumbs
Also See for DXS-3600 Series:
- Cli reference manual (1456 pages) ,
- Reference manual (1328 pages) ,
- Hardware installation manual (55 pages)
Table of Contents
Advertisement
DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch Web UI Reference Guide
Parameter
Unit
Source File
Click the Backup button to initiate the configuration file backup.
Configuration Backup to TFTP
This window is used to initiate a configuration file backup to a TFTP server.
To view the following window, click Tools > Configuration Restore & Backup > Configuration Backup
to TFTP, as shown below:
The fields that can be configured are described below:
Parameter
Unit
TFTP Server IP
VRF Name
Source File
Destination File
Click the Backup button to initiate the configuration file backup.
Configuration Backup to FTP
This window is used to initiate a configuration file backup to an FTP server.
To view the following window, click Tools > Configuration Restore & Backup > Configuration Backup
to FTP, as shown below:
Description
Select the switch unit that will be used for this configuration here.
Enter the source filename and path of the configuration file located on
the switch here. This field can be up to 64 characters long. Select the
running-config option to back up the running configuration file from
the switch. Select the startup-config option to back up the start-up
configuration file from the switch.
Figure 15-15 Configuration Backup to TFTP Window
Description
Select the switch unit that will be used for this configuration here.
Enter the TFTP server's IP address here. When select the IPv4 option,
enter the IPv4 address of the TFTP server in the space provided.
When the IPv6 option is selected, enter the IPv6 address of the TFTP
server in the space provided.
Enter the VRF name here. This name can be up to 12 characters long.
Enter the source filename and path of the configuration file located on
the switch here. This field can be up to 64 characters long. Select the
running-config option to back up the running configuration file from
the switch. Select the startup-config option to back up the start-up
configuration file from the switch.
Enter the destination path and location where the configuration file
should be stored on the TFTP server. This field can be up to 64
characters long.
610
Advertisement
Table of Contents
