D-Link DXS-3600 Series Reference Manual page 652

DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch Web UI Reference Guide
Log Description
Event description: the host failed to pass the authentication.
Log Message: MAC-based Access Control host login fail (MAC: <mac-address>,
<interface-id>, VID: <vlan-id>)
Parameters description:
mac-address: the host MAC addresses.
interface-id: the interface on which the host is authenticated.
vlan-id: the VLAN ID on which the host exists.
Event description: the authorized user number on the whole device has reached
the maximum user limit.
Log Message: MAC-based Access Control enters stop learning state..
Event description: the authorized user number on the whole device is below the
maximum user limit in a time interval.
Log Message: MAC-based Access Control recovers from stop learning state.
Event description: the authorized user number on an interface has reached the
maximum user limit.
Log Message: <interface-id> enters MAC-based Access Control stop learning state
Parameters description:
interface-id: the interface on which the host is authenticated.
Event description: the authorized user number on an interface is below the
maximum user limit in a time interval.
Log Message: <interface-id> recovers from MAC-based Access Control stop
learning state.
Parameters description:
interface-id: the interface on which the host is authenticated.
Management Port
Log Description
Event description: Record the event if any error frames which can affect
management port
Notice: Connectivity, such as CRC errors, alignment and jabber errors, is detected
every two minutes.
Log Message: Detected <counter> <error-counter-name> on <interface-id>.
Parameters description:
counter: The error frame counters.
error-counter-name: Error counter name, include: rxFCSErrorPkts,
rxAlignmentErrorPkts, rxCodeErrorPkts, rxUndersizedPkts,
rxOversizedPkts, rxFragmentPkts, rxJabbers,rxDropPkts,
txExcessiveDeferralPkts, txFCSErrorPkts, txLateCollisionPkts,
txExcessiveCollisionPkts and txDropPkts counter.
interface-id: Out of band management interface.
Module
Log Description
Event Description: Module inserts and can works.
Log Message: Module <module-type> is inserted.
641
Severity
Critical
Warning
Warning
Warning
Warning
Severity
Notice
Severity
Informational