DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch Web UI Reference Guide
6.
Layer 3 Features
ARP
Gratuitous ARP
IPv6 Neighbor
Interface
UDP Helper
IPv4 Static/Default Route
IPv4 Route Table
IPv6 Static/Default Route
IPv6 Route Table
Route Preference
ECMP Load Balancing Settings
IPv6 General Prefix
IP Tunnel Settings
URPF Settings
VRF
RIP
RIPng
OSPF
IP Multicast Routing Protocol
BGP
IP Route Filter
Policy Route
VRRP Settings
ARP
ARP Aging Time
This window is used to view and configure the ARP aging time settings.
To view the following window, click L3 Features > ARP > ARP Aging Time, as shown below:
The fields that can be configured are described below:
Parameter
Timeout
Click the Edit button to re-configure the specific entry.
Click the Apply button to accept the changes made.
Static ARP
This window is used to view and configure the static ARP settings.
Figure 6-1 ARP Aging Time Window
Description
After click the Edit button, enter the ARP aging timeout value here.
169