D-Link DXS-3600 Series Reference Manual page 579

DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch Web UI Reference Guide
The fields that can be configured in Static FTN Settings are described below:
Parameter
FEC
Mask
Out Label
Next Hop
Click the Apply button to accept the changes made.
Click the Delete by IP button to delete the specified entry based on the IP address entered.
Click the Delete All button to delete all the entries.
The fields that can be configured in Static ILM Settings are described below:
Parameter
In Label
Forward Action
Swap Label
Next Hop
FEC
Mask
Click the Apply button to accept the changes made.
Click the Delete by In Label button to delete the specified entry based on the In Label entered.
Click the Delete All button to delete all the entries.
The fields that can be configured in Find FTN are described below:
Figure 11-3 MPLS Forwarding Settings Window
Description
Enter the FEC's IPv4 address of the static FTN here.
Enter the FEC's subnet mask of the static FTN here.
Enter the out label value for this FEC here. The range is from 0 to 999.
Enter the next hop IPv4 address of this FEC here.
Description
Enter the incoming label's value of the ILM here. The range is from 0
to 999.
Select the forward action that will be taken here. Options to choose
from are Swap Label and Pop.
After selecting to use the Swap Label forward action, enter the swap
label value here. The range is from 0 to 999.
After selecting to use the Swap Label forward action, enter the next
hop IPv4 address of the FEC here.
Enter the FEC's IPv4 address that will be associated with the ILM
here.
Enter the FEC's subnet mask that will be associated with the ILM here.
568