D-Link DXS-3600 Series Reference Manual page 600

DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch Web UI Reference Guide
Parameter
Destination
Source
Click the Add button to add the newly configured mirror entry based on the information entered.
Click the Delete button to delete an existing mirror entry based on the information entered.
The fields that can be configured for Mirror Session Table are described below:
Parameter
Mirror Session Type
Click the Find button to locate a specific entry based on the information entered.
Click the Show Detail button to view more detailed information about the mirror session.
After clicking the Show Detail button, the following window will appear:
Description
between 1 and 4.
Tick the checkbox, next to the Destination option, to configure the
destination for this port mirror entry.
In the first drop-down menu select the destination type option. Options
to choose from are Port, Remote VLAN, and Replace.
•
Port: After selecting this option, select the switch's unit ID and
destination port number from the drop-down menus.
•
Remove VLAN: After selecting this option, select the switch's
unit ID and destination port number from the drop-down menus
and enter the VID in the space provided. The VID must be
between 2 and 4094.
•
Replace: After selecting this option, enter the ACL Access List
name and VID (VLAN ID) in the spaces provided.
Tick the checkbox, next to the Source option, to configure the source
for this port mirror entry.
In the first drop-down menu select the source type option. Options to
choose from are Port, ACL, VLAN, and Remote VLAN.
•
Port: After selecting this option, select the switch's unit ID, From
Port and To Port numbers from the drop-down menus. Lastly
select the Frame Type option from the last drop-down menu.
Options to choose from are Both, RX, TX, and TX Forwarding.
When selecting Both, traffic in both the incoming and outgoing
directions will be mirrored. When selecting RX, traffic in only the
incoming direction will be mirrored. When selecting TX, traffic in
only the outgoing direction will be mirrored. When selecting TX
Forwarding, traffic in only the outgoing direction will be mirrored
and forwarded. Select the CPU RX option to also monitor CPU
traffic.
•
ACL: After selecting this option, enter the ACL name in the
space provided.
•
VLAN: After selecting this option, enter the VID List in the space
provided and select the Frame Type from the drop-down menu.
•
Remote VLAN: After selecting this option, enter the VID in the
space provided. The VID must be between 2 and 4094.
Description
Select the mirror session type of information that will be displayed from
the drop-down menu. Options to choose from are All Session,
Session Number, Remote Session, and Local Session.
After selecting the Session Number option, select the session number
from the second drop-down menu. This number is from 1 to 4.
589