D-Link DXS-3600 Series Reference Manual page 258

Layer 2/3 managed 10gigabut ethernet switch

Hide thumbs Also See for DXS-3600 Series:

Table of Contents

DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch Web UI Reference Guide

To view the following window, click L3 Features > IP Multicast Routing Protocol > PIM > PIM for IPv4

> PIM RP Address, as shown below:

The fields that can be configured in RP Address Settings are described below:

Group Access List Name

Click the Add button to add a new entry based on the information entered.

Click the Delete button to delete an entry based on the information entered.

After clicking the Show List button, the following page will appear.

The fields that can be configured are described below:

Figure 6-105 PIM RP Address Window

Enter the RP's IPv4 address here.

Enter the standard access list that will be used here. Alternatively, click

the Show List button to find and select any of the exiting access lists

configured on this switch to be used in this configuration.

Select the All Groups option to map the RP to all multicast groups.

Figure 6-106 PIM RP Address (Show List) Window

Select the ACL type that will be used to display the type of existing

access lists in the table here. Options to choose from are IP ACL,

Expert IP ACL, IPv6 ACL, Expert IPv6 ACL, MAC ACL, and Expert

Select the radio button of the access list in the table that will be used