D-Link DXS-3600 Series Reference Manual page 292

DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch Web UI Reference Guide
As the time passed, the penalty of the route decreased. If the penalty of the route falls below the re-use
threshold, the route will be restored as a normal route and update message will be sent for the route.
If a route map is configured but the route map doesn't exist, it acts as all routes are enabled for
dampening.
To view the following window, click L3 Features > BGP > BGP Dampening Settings, as shown below:
The fields that can be configured in BGP Dampening are described below:
Parameter
Address Family
Click the Apply button to accept the changes made.
The fields that can be configured in BGP Dampening State are described below:
Parameter
Dampening State
Click the Apply button to accept the changes made.
The fields that can be configured in BGP Dampening Route Map are described below:
Parameter
BGP Dampening Route Map
Click the Apply button to accept the changes made.
Figure 6-153 BGP Dampening Settings Window
Description
Select the address family used here. Options to choose from are IPv4
Unicast and IPv4 VRF.
After selecting the IPv4 VRF option, enter the VRF instance's name
that will be used here. This name can be up to 12 characters long.
Alternatively, click the Please Select button to open a new window to
select and use a configured VRF instance from the list.
Description
Select to enable or disable the BGP dampening feature here.
Description
Enter the BGP dampening route map's name here. This name can be
up to 16 characters long
281