Snmp Global Settings - D-Link DXS-3600 Series Reference Manual

DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch Web UI Reference Guide
SNMP settings are configured using the menus located on the SNMP V3 folder of the Web manager.
Workstations on the network that are allowed SNMP privileged access to the Switch can be restricted with
the Management Station IP Address menu.

SNMP Global Settings

This window is used to view and configure the SNMP global settings and trap settings.
To view the following window, click Management > SNMP > SNMP Global Settings, as shown below:
The fields that can be configured in SNMP Global Settings are described below:
Parameter
SNMP Global State
SNMP Response Broadcast
Request
SNMP UDP Port
Trap Source Interface
The fields that can be configured in Trap Settings are described below:
Parameter
Trap Global State
SNMP Authentication Trap
Port Link Up
Figure 4-5 SNMP Global Settings Window
Description
Select this option to enable or disable the SNMP feature.
Select this option to enable or disable the server to response to
broadcast SNMP GetRequest packets.
Enter the SNMP UDP port number.
Enter the interface whose IP address will be used as the source
address for sending the SNMP trap packet.
Description
Select this option to enable or disable the sending of all or specific
SNMP notifications.
Tick this option to control the sending of SNMP authentication failure
notifications. An authenticationFailuretrap is generated when the
device receives an SNMP message that is not properly authenticated.
The authentication method depends on the version of SNMP being
used. For SNMPv1 or SNMPv2c, authentication failure occurs if
packets are formed with an incorrect community string. For SNMPv3,
authentication failure occurs if packets are formed with an incorrect
SHA/MD5 authentication key.
Tick this option to control the sending of port link up notifications. A
linkup trap is generated when the device recognizes that one of the
communication links has come up.
35