Mac Notification - D-Link DXS-3600 Series Reference Manual

DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch Web UI Reference Guide
The fields that can be configured are described below:
Parameter
Port
VID
MAC Address
Click the Apply button to accept the changes made.
Click the Clear Dynamic by Port button to clear the dynamic MAC address listed on the corresponding
port.
Click the Clear Dynamic by VLAN button to clear the dynamic MAC address listed on the corresponding
VLAN.
Click the Clear Dynamic by MAC button to clear the dynamic MAC address entered.
Click the Find button to locate a specific entry based on the information entered.
Click the Clear All button to clear all dynamic MAC addresses.
Click the View All button to display all the MAC addresses recorded in the MAC address table.

MAC Notification

This window is used to view and configure MAC notification.
To view the following window, click L2 Features > FDB > MAC Notification, as shown below:
Figure 5-5 MAC Address Table Window
Description
Select the stacking unit ID and the port number of the switch that will
be configured here.
Enter the VLAN ID that will be used for this configuration here.
Enter the MAC address that will be used for this configuration here.
94