D-Link DXS-3600 Series Reference Manual page 438

DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch Web UI Reference Guide
Parameter
CoS
Inner CoS
VID
Inner VID
Time Range
Click the Apply button to accept the changes made.
Click the Back button to discard the changes made and return to the previous page.
To enable the Counter State option or to enter a Remark for the ACL, click the Edit button, next to the
specific ACL (found in the ACL table).
Figure 8-81 Extended MAC ACL (Counter State Enabled) Window
The fields that can be configured are described below:
Parameter
Start Sequence No.
Stop
Counter State
Remark
Click the Apply button to accept the changes made.
Click the Delete button to remove the specific entry.
To view the list of rules, that are associated with an ACL, select the ACL (found in the ACL table). The
rule of ACL rules, connected to the selected ACL, will be displayed in the ACL rule table, as shown below:
Description
selected, above, the appropriate hexadecimal value will automatically
be entered.
Select the CoS value used here. This value is between 0 and 7.
Select the inner CoS value used here. This value is between 0 and 7.
Enter the VLAN ID that will be associated with this ACL rule here. This
value must be between 1 and 4094.
Enter the inner VLAN ID that will be associated with this ACL rule here.
This value must be between 1 and 4094.
Enter the time profile name that will be associated with this ACL rule,
here.
Description
Enter the start sequence number here.
Enter the stop sequence number here.
Select to enable or disable the counter state option here.
Enter an optional remark that will be associated with this ACL here.
427