DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch Web UI Reference Guide
Parameter
State
Click the Apply button to accept the changes made.
BGP Confederation Settings
This window is used to view and configure the BGP confederation settings.
To view the following window, click L3 Features > BGP > BGP Confederation Settings, as shown
below:
The fields that can be configured in BGP Confederation Settings are described below:
Parameter
Confederation Identifier
Confederation Peer
Click the Apply button to accept the changes made.
Enter a page number and click the Go button to navigate to a specific page when multiple pages exist.
BGP AS Path Access List Settings
This window is used to view and configure the BGP Autonomous System's (AS) path access list settings.
To view the following window, click L3 Features > BGP > BGP AS Path Access List Settings, as
shown below:
Description
the space provided that will act as the route reflector client.
Select to enable or disable the BGP route reflector client feature for
neighbors here.
Figure 6-157 BGP Confederation Settings Window
Description
Enter the BGP Autonomous System (AS) number here. The range is
from 1 and 4294967295.
Select the Add option and enter the BGP peer's ID numbers to add
new BGP confederation peers to the group.
Select the Delete option and enter the BGP peer's ID numbers to
delete BGP confederation peers from the group.
The range is from 1 to 4294967295.
285