Firmware Backup To Rcp - D-Link DXS-3600 Series Reference Manual

DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch Web UI Reference Guide
The fields that can be configured are described below:
Parameter
Unit
FTP Server IP
TCP Port
User Name
Password
VRF Name
Source File
Destination File
Click the Backup button to initiate the firmware backup.

Firmware Backup to RCP

This window is used to initiate a firmware backup to an RCP server.
To view the following window, click Tools > Firmware Upgrade & Backup > Firmware Backup to RCP,
as shown below:
The fields that can be configured are described below:
Parameter
Unit
RCP Server IP
User Name
Description
Select the switch unit that will be used for this configuration here.
Enter the FTP server's IP address here. When select the IPv4 option,
enter the IPv4 address of the FTP server in the space provided. When
the IPv6 option is selected, enter the IPv6 address of the FTP server in
the space provided.
Enter the TCP port number used for the FTP connection here. The
range is from 1 to 65535.
Enter the user name used for the FTP connection here. This name can
be up to 32 characters long.
Enter the password used for the FTP connection here. This password
can be up to 15 characters long.
Enter the VRF name here. This name can be up to 12 characters long.
Enter the source filename and path of the firmware file located on the
switch here. This field can be up to 64 characters long.
Enter the destination filename and path of the firmware file to be
backed up to the FTP server here. This field can be up to 64
characters long.
Figure 15-9 Firmware Backup to RCP Window
Description
Select the switch unit that will be used for this configuration here.
Enter the RCP server's IP address here. When select the IPv4 option,
enter the IPv4 address of the RCP server in the space provided. When
the IPv6 option is selected, enter the IPv6 address of the RCP server
in the space provided.
Enter the user name used for the RCP connection here. This name
605