Device Environment - D-Link DXS-3600 Series Reference Manual

DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch Web UI Reference Guide
The fields that can be configured in sFlow Poller Settings are described below:
Parameter
Unit
From Port ~ To Port
Instance
Receiver
Interval
Click the Apply button to accept the changes made.
Click the Delete button to remove the specified entry.

Device Environment

The device environment feature displays the Switch internal temperature status.
To view the following window, click Monitoring > Device Environment, as shown below:
Description
Select the switch unit that will be used for this configuration here.
Select the appropriate port range used for the configuration here.
Enter the instance's index number if multiple samplers are associated
with one interface. The valid range is from 1 to 65535.
Enter the receiver's index value for this poller here. This value must be
between 1 and 4.
Enter the maximum number of seconds between successive polling
samples. This value must be between 0 and 120 seconds. Entering 0
will disable this feature. By default this value is 0.
Figure 13-11 Device Environment Window
596