Lldp Dot3 Tlvs Settings - D-Link DXS-3600 Series Reference Manual

DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch Web UI Reference Guide
The fields that can be configured in LLDP Dot1 TLVs Settings are described below:
Parameter
Unit
From Port ~ To Port
Port VLAN
Protocol VLAN
VLAN Name
Protocol Identity
Click the Apply button to accept the changes made.

LLDP Dot3 TLVs Settings

This window is used to view and configure an individual port or group of ports to exclude one or more
IEEE 802.3 organizational specific TLV data type from outbound LLDP advertisements.
To view the following window, click L2 Features > LLDP > LLDP Dot3 TLVs Settings, as shown below:
Figure 5-76 LLDP Dot1 TLVs Settings Window
Description
Select the switch unit that will be used for this configuration here.
Select the appropriate port range used for the configuration here.
Select this option to enable or disable the port VLAN ID TLV to send.
The Port VLAN ID TLV is an optional fixed length TLV that allows a
VLAN bridge port to advertise the port's VLAN identifier (PVID) that will
be associated with untagged or priority tagged frames.
Select this option to enable or disable Port and Protocol VLAN ID
(PPVID) TLV to send, and enter the VLAN ID in PPVID TLV.
Select this option to enable or disable the VLAN name TLV to send,
and enter the ID of the VLAN in the VLAN name TLV.
Select this option to enable or disable the Protocol Identity TLV to
send, and the protocol name. Options for protocol name to choose
from are None, EAPOL, LACP, GVRP, STP, and All.
162