D-Link DXS-3600 Series Reference Manual page 312

DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch Web UI Reference Guide
Neighbor Activate
This window is used to activate the exchange of routing information with a specified BGP neighbor.
To view the following window, click L3 Features > BGP > BGP Neighbor > Neighbor Activate, as
shown below:
The fields that can be configured in Neighbor Activate are described below:
Parameter
Address Family
Neighbor
Action
Click the Apply button to accept the changes made.
Neighbor Shutdown
This window is used to enable or disable a BGP neighbor or a peer group. Active session for the specified
neighbor or active session for all members of the peer group will be terminated. When a session is
shutdown, all the associated routing information will be removed.
To view the following window, click L3 Features > BGP > BGP Neighbor > Neighbor Shutdown, as
shown below:
The fields that can be configured in Neighbor Shutdown are described below:
Figure 6-178 Neighbor Activate Window
Description
Select the address family used here. Options to choose from are IPv4
Unicast, IPv4 VRF, and VPNv4.
•
IPv4 Unicast: Select to use the IPv4 unicast family here.
•
IPv4 VRF: Select and enter the IPv4 VRF instance's name that
will be used here. This name can be up to 12 characters long.
Alternatively, click the Please Select button to open a new
window to select and use a configured VRF instance from the
list.
•
VPNv4: Select to use the VPNv4 address family here.
There are two neighbor options here, IPv4 Address and Peer Group.
Select the IPv4 Address option and enter the IP address of the
neighbor peer here.
Select the Peer Group option and enter the BGP peer group's name
here. This name can be up to 32 characters long.
Select Activate to activate the exchange of routing information with a
specified BGP neighbor.
Select No Activate to deactivate the exchange with the specified BGP
neighbor.
Figure 6-179 Neighbor Shutdown Window
301