Qcn Cnpv Interface Simple; Qcn Cp Interface Settings - D-Link DXS-3600 Series Reference Manual

Layer 2/3 managed 10gigabut ethernet switch

Hide thumbs Also See for DXS-3600 Series:

Table of Contents

DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch Web UI Reference Guide

Alternate Priority

Click the Apply button to accept the changes made.

Click the Find button to locate a specific entry based on the information entered.

QCN CNPV Interface Simple

This window is used to display the simple QCN configuration and status for each CNPV.

To view the following window, click QoS > QCN > QCN CNPV Interface Simple, as shown below:

The fields that can be configured in QCN CNPV Interface Simple are described below:

This window is used to view and configure the QCN Congestion Point (CP) interface settings.

To view the following window, click QoS > QCN > QCN CP Interface Settings, as shown below:

Edge: Specifies that the priority parameter of frame input at this

priority is remapped to an alternate value. Frames at other

priorities are not remapped to this priority and the frames are

transmitted without a CN-TAG.

Select the alternate priority value that will be used on the specified

port(s) here. The range is from 0 to 7.

Select the CNPV value that will be used in the search here. The range

is from 0 to 7.

Figure 7-33 QCN CNPV Interface Simple Window

Select the switch's unit ID that will be used here.