Authentication Settings - D-Link DXS-3600 Series Reference Manual

DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch Web UI Reference Guide
Click the Delete button to remove the specified entry.
Enter a page number and click the Go button to navigate to a specific page when multiple pages exist.

Authentication Settings

This window is used to view and configure the AAA network and EXEC authentication settings.
To view the following window, click Security > AAA > Authentication Settings, as shown below:
The fields that can be configured in AAA Authentication 802.1X are described below:
Parameter
Status
Method 1 ~ Method 4
Click the Apply button to accept the changes made.
The fields that can be configured in AAA Authentication MAC-Auth are described below:
Parameter
Status
Method 1 ~ Method 4
Click the Apply button to accept the changes made.
The fields that can be configured in AAA Authentication WEB-Auth are described below:
Parameter
Status
Method 1 ~ Method 4
Click the Apply button to accept the changes made.
Figure 9-23 Authentication Settings Window
Description
Select to enable or disable the AAA 802.1X authentication state here.
Select the method lists that will be used for this configuration here.
Options to choose from are none, local, group and radius.
Description
Select to enable or disable the AAA MAC authentication state here.
Select the method lists that will be used for this configuration here.
Options to choose from are none, local, group and radius.
Description
Select to enable or disable the AAA Web authentication state here.
Select the method lists that will be used for this configuration here.
Options to choose from are none, local, group and radius.
479