Vpls Mac Address Table - D-Link DXS-3600 Series Reference Manual

DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch Web UI Reference Guide
Click the Back button to return to the previous window.

VPLS MAC Address Table

This window is used to clear and display VPLS MAC address information.
To view the following window, click MPLS L2VPN > VPLS MAC Address Table, as shown below:
The fields that can be configured are described below:
Parameter
VPLS Name
IP Address
VC ID
Interface
VLAN
MAC Address
Type
Click the Clear by PW button to clear the MAC addresses associated with the PW.
Figure 12-9 VPLS Settings (Show Detail, Local ACs, Show Detail) Window
Figure 12-10 VPLS MAC Address Table Window
Description
Enter the VPLS instance's name here. This name can be up to 32
characters long.
Enter the LSR's ID that is used to identify the PE to which the peer
belongs to here.
Enter the PW's VC ID here. The range is from 1 to 4294967295.
Select the switch's unit ID that will be used here.
Select the port that will be used here.
Enter the service VLAN's ID here. The range is from 1 to 4094.
Enter the MAC address that will be used here.
Select the type of information to be specified in the search query here.
Options to choose from are None, Peer, and AC.
586