D-Link DXS-3600 Series Reference Manual page 166

DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch Web UI Reference Guide
Parameter
Action
Address Type
IP Address
From
Click the Apply button to accept the changes made.
The fields that can be configured in Multicast VLAN Table are described below:
Parameter
VID
Click the Find button to locate a specific entry based on the information entered.
Click the View All button to view all the entries.
Multicast VLAN Group Settings
This widow is used to view and configure the multicast VLAN's group settings.
To view the following window, click L2 Features > L2 Multicast Control > Multicast VLAN > Multicast
VLAN Group Settings, as shown below:
Description
Select Add to add a new entry based in the information entered.
Select Delete to delete an entry based in the information entered.
Select the address type here. Options to choose from are IPv4 and
IPv6.
•
IPv4: Specifies to enter the source IPv4 address for IGMP
control packet reporting up to routers.
•
IPv6: Specifies to enter the source IPv6 address for MLD control
packet reporting up to routers.
Enter the IPv4/IPv6 address here.
Select the "from" option here. Options to choose from are Receiver,
Source, and Both.
•
Receiver: Specifies that the source IPv4/IPv6 address of the
IGMP/MLD report/leave packet received on any multicast VLAN
receiver port will be replaced.
•
Source: Specifies that the source IPv4/IPv6 address of the
IGMP/MLD report/leave packet received on any multicast VLAN
source port will be replaced.
•
Both: Specifies that the source IPv4/IPv6 address of the
IGMP/MLD report/leave packet received on any port in the
multicast VLAN will be replaced.
Description
Enter the multicast VLAN's ID that will be used here. The range is 2 to
4094.
155