D-Link DXS-3600 Series Reference Manual page 187

DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch Web UI Reference Guide
The fields that can be configured are described below:
Parameter
Interface VLAN
Click the Apply button to accept the changes made.
Click the Find button to locate a specific entry based on the information entered.
Click the Detail button to view and configure more detailed settings for the IPv6 interface entry.
After clicking the Detail button, the following page will be available.
Figure 6-11 IPv6 Interface (Detail, IPv6 Interface Settings) Window
The fields that can be configured are described below:
Parameter
IPv6 MTU
IPv6 State
Click the Back button to discard the changes made and return to the previous page.
Figure 6-10 IPv6 Interface Window
Description
Enter the VLAN interface's ID that will be associated with the IPv6
entry.
Description
Enter the IPv6 MTU value here. The range is from 1280 to 65534
bytes. By default, this value is 1500 bytes. This parameter is used to
configure the MTU to be advertised in RA messages.
Select to enable or disable the IPv6 interface's global state here.
176