DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch Web UI Reference Guide
The fields that can be configured are described below:
Parameter
Unit
From Port ~ To Port
Direction
Policy Map Name
Click the Apply button to accept the changes made.
QoS PFC
Network QoS Class Map
This window is used to view and configure the network Quality of Service (QoS) feature's Priority-based
Flow Control (PFC) class map settings.
To view the following window, click QoS > QoS PFC > Network QoS Class Map, as shown below:
The fields that can be configured in Network QoS Class Map Settings are described below:
Figure 7-17 Policy Binding Window
Description
Select the switch unit that will be used for this configuration here.
Select the range of ports that will be used for this configuration here.
Select the direction option here. Options to choose from are Input and
Output. Input specified ingress traffic and output specifies egress
traffic.
Enter the policy map name here. This name can be up to 32
characters long. Select the None option to not tie a policy map to this
entry.
Figure 7-18 Network QoS Class Map Window
334