D-Link DXS-3600 Series Reference Manual page 226

DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch Web UI Reference Guide
The fields that can be configured in OSPF LSDB Table are described below:
Parameter
VRF
LSDB Type
Link State
Click the Find button to locate a specific entry based on the information entered.
After clicking the Select VRF button, the following page will appear.
The fields that can be configured are described below:
Parameter
VRF
Click the OK button to accept the changes made.
Enter a page number and click the Go button to navigate to a specific page when multiple pages exist.
Figure 6-63 OSPFv2 LSDB Table Window
Description
Enter the VRF instance's name that will be used here. This name can
be up to 12 characters long. Alternatively, click the Select VRF button
to open a new window to select and use a configured VRF instance
from the list.
Select the LSDB type of information that will be displayed here.
Options to choose from are All, Router, Network, Summary, ASBR
Summary, External, Stub, and NSSA External.
Select the link state information that will be displayed here. Options to
choose from are All, Link State ID, Self Originate, and Adv Router.
•
All: Specifies to display all OSPFv2 link state information.
•
Link State ID: Specifies to display information associated with
the link state ID. Enter the link state ID in the space provided
here.
•
Self Originate: Specifies to display LSAs generated by the local
router.
•
Adv Router: Specifies to display all of the LSAs generated by
the advertising router. Enter the advertising router's ID in the
space provided here.
Figure 6-64 OSPFv2 LSDB Table (Select VRF) Window
Description
Select the VRF instance from the list that will be used here.
215