DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch Web UI Reference Guide
The fields that can be configured in IP TFTP Source Interface are described below:
Parameter
Source Interface State
Interface Type
VID
Click the Apply button to accept the changes made.
The fields that can be configured in IP FTP Source Interface are described below:
Parameter
Source Interface State
Interface Type
VID
Click the Apply button to accept the changes made.
The fields that can be configured in IP RCP Source Interface are described below:
Parameter
Source Interface State
Interface Type
VID
Click the Apply button to accept the changes made.
Figure 4-57 IP Source Interface Window
Description
Select to enable or disable the IP TFTP source interface's state here.
After enabling the Source Interface State option, select the interface
type here. Options to choose from are Loopback, Mgmt, and VLAN.
Enter the interface's ID here. For loopback interfaces this value is from
1 to 8. For the management interface (Mgmt) this value can only be 0.
For VLAN interfaces this value is from 1 to 4094.
Description
Select to enable or disable the IP FTP source interface's state here.
After enabling the Source Interface State option, select the interface
type here. Options to choose from are Loopback, Mgmt, and VLAN.
Enter the interface's ID here. For loopback interfaces this value is from
1 to 8. For the management interface (Mgmt) this value can only be 0.
For VLAN interfaces this value is from 1 to 4094.
Description
Select to enable or disable the IP RCP source interface's state here.
After enabling the Source Interface State option, select the interface
type here. Options to choose from are Loopback, Mgmt, and VLAN.
Enter the interface's ID here. For loopback interfaces this value is from
1 to 8. For the management interface (Mgmt) this value can only be 0.
For VLAN interfaces this value is from 1 to 4094.
71