D-Link DXS-3600 Series Reference Manual page 315

DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch Web UI Reference Guide
The fields that can be configured in Neighbor Filter Settings are described below:
Parameter
Address Family
Neighbor
Filter List Type
Filter List Action
Filter List Name
Prefix List Type
Prefix List Action
Figure 6-182 Neighbor Filter Settings Window
Description
Select the address family used here. Options to choose from are IPv4
Unicast, IPv4 VRF, and VPNv4.
•
IPv4 Unicast: Select to use the IPv4 unicast family here.
•
IPv4 VRF: Select and enter the IPv4 VRF instance's name that
will be used here. This name can be up to 12 characters long.
Alternatively, click the Please Select button to open a new
window to select and use a configured VRF instance from the
list.
•
VPNv4: Select to use the VPNv4 address family here.
There are two neighbor options here, IPv4 Address and Peer Group.
Select the IPv4 Address option and enter the IP address of the
neighbor peer here.
Select the Peer Group option and enter the BGP peer group's name
here. This name can be up to 32 characters long.
Select the filter list type here. Options to choose from are In and Out.
•
In: Specifies to apply the check for access lists in the ingress
direction.
•
Out: Specifies to apply the check for access lists in the egress
direction.
Select Add to add a new filter list entry based in the information
entered.
Select Delete to delete a filter list entry based in the information
entered.
Enter the filter list's name here. This name can be up to 16 characters
long.
Select the prefix list type here. Options to choose from are In and Out.
•
In: Specifies the filter list applied to paths advertised from the
neighbor.
•
Out: Specifies the filter list applied to paths to be advertised to
the neighbor.
Select Add to add a new prefix list entry based in the information
entered.
Select Delete to delete a prefix list entry based in the information
entered.
304