D-Link DXS-3600 Series Reference Manual page 592

DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch Web UI Reference Guide
The fields that can be configured in Find VPWS are described below:
Parameter
VC ID
Click the Find button to locate a specific entry based on the information entered.
Click the View All button to display all the entries.
Click the Edit button to modify the specified entry.
Click the Show Detail button to view more detailed information for the specified entry.
Click the Delete button to delete the specified entry.
After clicking the Edit button, the following page will appear.
The fields that can be configured in PW Settings are described below:
Parameter
PW Name
Click the Back button to return to the previous window.
Click the Apply button to accept the changes made.
The fields that can be configured in PW Redundancy Settings are described below:
Parameter
Peer
VC ID
Delay
Click the Apply button to accept the changes made.
After clicking the Show Detail button, the following page will appear.
Description
Enter the Pseudo-Wire's (PW) service instance ID here. The range is
from 1 to 4294967295.
Figure 12-2 VPWS Settings (Edit) Window
Description
Select and enter the Pseudo-Wire's (PW) name here. This name can
be up to 64 characters long. Select the None option to use the default
setting.
Description
Enter the peer's LSR ID here that is used to identify the other end
Provider Edge (PE).
Enter the PW's service instance ID here. The range is from 1 to
4294967295.
Enter the delay value here. This is to switch back to the primary PW
with the specified delay time after the primary PW comes back. The
range is from 0 to 180 seconds.
Selecting the Never option specifies not to switch back to the primary
PW even if it comes back. This is the default option.
581