Rip Database; Ripng; Ripng Settings - D-Link DXS-3600 Series Reference Manual

DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch Web UI Reference Guide

RIP Database

This window is used to display the Routing Information Protocol (RIP) routing database. Summary
address entries will appear in the database only if relevant child routes exist and are being summarized.
When the last child route for a summary address becomes invalid, the summary address is also removed
from the routing table.
To view the following window, click L3 Features > RIP > RIP Database, as shown below:
The fields that can be configured in RIP Database are described below:
Parameter
Network Address
VRF Name
Click the Find button to locate a specific entry based on the information entered.
Click the View All button to display all the entries.

RIPng

RIPng Settings

This window is used to view and configure the Routing Information Protocol Next Generation (RIPng)
settings, also known as IPv6 RIP.
To view the following window, click L3 Features > RIPng > RIPng Settings, as shown below:
Figure 6-42 RIP Database Window
Description
Enter the subnet prefix and the prefix length of the network(s) to be
displayed here.
Enter the VRF instance's name that will be used in this display here.
This name can be up to 12 characters long.
200