D-Link DXS-3600 Series Reference Manual page 162

DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch Web UI Reference Guide
MLD Snooping Mrouter Settings
This window is used to view and configure the specified interface(s) as the router ports or forbidden to be
IPv6 multicast router ports on the VLAN interface on the Switch.
To view the following window, click L2 Features > L2 Multicast Control > MLD Snooping > MLD
Snooping Mrouter Settings, as shown below:
The fields that can be configured in MLD Snooping Mrouter Settings are described below:
Parameter
VID
Configuration
Unit
From Port ~ To Port
Click the Apply button to accept the changes made.
Click the Delete button to remove the specified entry.
The fields that can be configured in MLD Snooping Mrouter Table are described below:
Parameter
VID
Click the Find button to locate a specific entry based on the information entered.
Click the View All button to view all the entries.
Enter a page number and click the Go button to navigate to a specific page when multiple pages exist.
MLD Snooping Statistics Settings
This window is used to view and clear the MLD snooping related statistics.
Figure 5-67 MLD Snooping Mrouter Settings Window
Description
Enter a VLAN ID between 1 and 4094.
Select the port configuration. Options to choose from are Port,
Forbidden Port, and Learn PIMv6.
•
Port - Select to have the configured ports as being connected to
multicast-enabled routers.
•
Forbidden Port - Select to have the configured ports as being
not connected to multicast-enabled routers.
•
Learn PIMv6 - Select to enable dynamic learning of multicast
router port.
Select the switch unit that will be used for this configuration here.
Select the appropriate port range used for the configuration here.
Description
Enter a VLAN ID between 1 and 4094.
151