Configuration Restore From Ftp - D-Link DXS-3600 Series Reference Manual

DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch Web UI Reference Guide
To view the following window, click Tools > Configuration Restore & Backup > Configuration Restore
from TFTP, as shown below:
The fields that can be configured are described below:
Parameter
Unit
TFTP Server IP
VRF Name
Source File
Destination File
Replace
Click the Restore button to initiate the configuration restore.

Configuration Restore from FTP

This window is used to initiate a configuration restore from an FTP server.
To view the following window, click Tools > Configuration Restore & Backup > Configuration Restore
from FTP, as shown below:
Figure 15-11 Configuration Restore from TFTP Window
Description
Select the switch unit that will be used for this configuration here.
Enter the TFTP server's IP address here. When select the IPv4 option,
enter the IPv4 address of the TFTP server in the space provided.
When the IPv6 option is selected, enter the IPv6 address of the TFTP
server in the space provided.
Enter the VRF name here. This name can be up to 12 characters long.
Enter the source filename and path of the configuration file located on
the TFTP server here. This field can be up to 64 characters long.
Enter the destination path and location where the configuration file
should be stored on the switch. This field can be up to 64 characters
long. Select the running-config option to restore and overwrite the
running configuration file on the switch. Select the startup-config
option to restore and overwrite the start-up configuration file on the
switch.
Select this option to replace the configuration file on the switch with
this one.
607