Dscp Cos Mapping - D-Link DXS-3600 Series Reference Manual

DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch Web UI Reference Guide
The fields that can be configured are described below:
Parameter
Unit
From Port ~ To Port
Trust State
DSCP Mutation Map
Click the Apply button to accept the changes made.

DSCP CoS Mapping

This window is used to view and configure the DSCP CoS mapping settings.
To view the following window, click QoS > Advanced Settings > DSCP CoS Mapping, as shown below:
Figure 7-8 Port Trust State and Mutation Binding Window
Description
Select the switch unit that will be used for this configuration here.
Select the range of ports that will be used for this configuration here.
Select the port trust state option here. Options to choose from are CoS
and DSCP.
Select and enter the DSCP mutation map name used here. This name
can be up to 32 characters long. Select the None option to not allocate
a DSCP mutation map to the port(s).
325