D-Link DXS-3600 Series Reference Manual page 208

DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch Web UI Reference Guide
Parameter
VRF Name
Click the Apply button to accept the changes made.
Click the Edit button to modify the specified entry.
Click the Delete button to delete the specified entry.
Enter a page number and click the Go button to navigate to a specific page when multiple pages exist.
After clicking the Edit button, the following page will appear.
The fields that can be configured in Redistribution Configuration are described below:
Parameter
Redistribution
Click the Apply button to accept the changes made.
Click the Back button to return to the previous window.
The fields that can be configured in RIP Configuration are described below:
Description
Enter the VRF instance's name that will be used here. This name can
be up to 12 characters long.
Figure 6-38 RIP Settings (Edit) Window
Description
First, select to enable or disable the RIP redistribution feature here.
Second, select the routing protocol (domain) that will be redistributed
into RIP. Options to choose from are BGP, Connected, ISIS, OSPF,
and Static. The Static option means to redistribute IP static routes.
The Connected option refers to routes that are established
automatically by virtue of configuring IP address on an interface.
Third, enter the value to be used as the metric for the redistributed
route here. The range is from 0 to 16.
Fourth, enter the route map's name that is used in the filtering of the
routes to be redistributed to the current routing protocol. If not
specified, all routes are redistributed.
197