D-Link DXS-3600 Series Reference Manual page 228

DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch Web UI Reference Guide
OSPFv2 Host Route Settings
This window is used to view and configure the OSPFv2 feature's host route settings. The router will
advertise specific host routes as the router's LSA for a stub link.
To view the following window, click L3 Features > OSPF > OSPFv2 > OSPFv2 Host Route Settings, as
shown below:
The fields that can be configured in OSPF Host Route Settings are described below:
Parameter
VRF Name
Area ID
Host IP
Cost
Click the Apply button to accept the changes made.
The fields that can be configured in OSPF Host Route Table are described below:
Parameter
VRF Name
Click the Find button to locate a specific entry based on the information entered.
After clicking the Select VRF button, the following page will appear.
Figure 6-67 OSPFv2 Host Route Settings Window
Description
Enter the VRF instance's name that will be used here. This name can
be up to 12 characters long. Alternatively, click the Select VRF button
to open a new window to select and use a configured VRF instance
from the list.
Enter the OSPF area's ID here.
Enter the host's IPv4 address here.
Enter the cost value for the stub entry here. The range is from 0 to
65535. Select the Default option to use the default value, which is 1.
Description
Enter the VRF instance's name that will be used here. This name can
be up to 12 characters long. Alternatively, click the Select VRF button
to open a new window to select and use a configured VRF instance
from the list.
217