D-Link DXS-3600 Series Reference Manual page 233

DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch Web UI Reference Guide
The fields that can be configured in OSPFv3 Area Table are described below:
Parameter
Process ID
Click the Find button to locate a specific entry based on the information entered.
Click the Delete button to delete the specified entry.
OSPFv3 Interface Settings
This window is used to view and configure the OSPFv3 feature's interface settings.
To view the following window, click L3 Features > OSPF > OSPFv3 > OSPFv3 Interface Settings, as
shown below:
The fields that can be configured in OSPFv3 Interface Settings are described below:
Parameter
Process ID
Instance ID
Area ID
Interface VLAN
Click the Apply button to accept the changes made.
The fields that can be configured in OSPF Interface Table are described below:
Parameter
Process ID
Interface VLAN
Click the Find button to locate a specific entry based on the information entered.
Description
Enter the process ID of the OSPF area used here. The range is from 1
to 65535.
Figure 6-74 OSPFv3 Interface Settings Window
Description
Enter the ID for an IPv6 OSPF routing process here. It is locally
assigned and should be unique for each IPv6 OSPF routing process
on the router. The range is from 1 to 65535.
Enter the instance identifier here. The range is from 0 to 255. If not
specified, the default is 0.
Enter the identifier of the area here. It can be specified as an IPv4
address.
Enter the VLAN interface's ID here. The range is from 1 to 4094.
Description
Enter the ID for an IPv6 OSPF routing process here. The range is from
1 to 65535.
Enter the VLAN interface's ID here. The range is from 1 to 4094.
222