Log Backup; Log Backup To Http - D-Link DXS-3600 Series Reference Manual

DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch Web UI Reference Guide
The fields that can be configured are described below:
Parameter
Unit
RCP Server IP
User Name
VRF Name
Source File
Destination File
Click the Backup button to initiate the configuration file backup.

Log Backup

Log Backup to HTTP

This window is used to initiate a system log backup to a local PC using HTTP.
To view the following window, click Tools > Log Backup > Log Backup to HTTP, as shown below:
The fields that can be configured are described below:
Parameter
Log Type
Figure 15-17 Configuration Backup to RCP Window
Description
Select the switch unit that will be used for this configuration here.
Enter the RCP server's IP address here. When select the IPv4 option,
enter the IPv4 address of the RCP server in the space provided. When
the IPv6 option is selected, enter the IPv6 address of the RCP server
in the space provided.
Enter the user name used for the RCP connection here. This name
can be up to 32 characters long.
Enter the VRF name here. This name can be up to 12 characters long.
Enter the source filename and path of the configuration file located on
the switch here. This field can be up to 64 characters long. Select the
running-config option to back up the running configuration file from
the switch. Select the startup-config option to back up the start-up
configuration file from the switch.
Enter the destination path and location where the configuration file
should be stored on the RCP server. This field can be up to 64
characters long.
Figure 15-18 Log Backup to HTTP Window
Description
Select the log type that will be backed up to the local PC using HTTP.
612